Oil Spill Products

Home/Oil Spill Products

Spill Tech is the leading suppliers and specialists of oil spill control and oil spill Maintenace products in Ireland. We offer top quality oil spill products at very affordable prices and will always back them with the number one customer care and product expertise and advice. Whether you are dealing with a large industrial scale oil spill clean up or a small chemical oil spill, our oil spill clean-up products are specially designed to help you respond to any type of spill effectively and quickly. Our vast range of products includes Agroremed for the restoration of petroleum contaminated soil, spillremed Marine which is a clean-up solution for to marine oil pollution, and much more.

  • One gallon (3.785 Liters) of AgroRemed treats 20 square feet (2 square meters) of soil contaminated with surface oil spill. AgroRemed can also be injected if the impacted soil is deep.

    Reports and case studies

    AgroRemed has consistently helped restore the soil quality to pre-spill values as shown in the reports attached. Please click on the images to find out more:
    • Cleanup at a shipyard.
    • Cleanup at an oil terminal.
    • In-situ bioremediation of sites after roadside accidents.
    • Municipal park site cleanup in Manditiruba, Brazil.
    • Cleanup at Manditiruba power substation, Manditiruba, Brazil.
    • Cleanup of a contaminated site in Atuba, Brazil.
    • Cleanup at a train station.
    • Cleanup and closure report at food mart.
    • Highway spill in WV cleaned up with AgroRemed
    • Closure of project after release of 150 gallons of home heating oil
  • AgroRemed is available in a 5 gallon (18.925 liters) pail and treats 100 square feet (9.29 square meters) of contaminated soil. It is sprayed directly for surface fuel oil spills or can be injected if the impacted soil is 4 feet below ground surface. It has been reported that the Total Petroleum Hydrocarbon (TPH) levels are reduced by more than 90% in 21 days with a single application. There is no maintenance or disposal of waste.

    Reports and case studies

    AgroRemed has consistently helped restore the soil quality to pre-spill values as shown in the reports attached. Please click on the images to find out more:
    • Cleanup at a shipyard.
    • Cleanup at an oil terminal.
    • In-situ bioremediation of sites after roadside accidents.
    • Municipal park site cleanup in Manditiruba, Brazil.
    • Cleanup at Manditiruba power substation, Manditiruba, Brazil.
    • Cleanup of a contaminated site in Atuba, Brazil.
    • Cleanup at a train station.
    • Cleanup and closure report at food mart.
    • Highway spill in WV cleaned up with AgroRemed
  • BilgeRemed for ship board pre-treatment of oily bilge water before it is released into open sea and to reduce load on oil water separators. BilgeRemed is also used in smaller boats that do not have an oil water separator. BilgeRemed is effective on a mixture of oils and greases. A gallon (3.785 liters) of BilgeRemed treats 100 gallons (378 Liters) of oily bilge water containing 10% oils and greases.5 gallon (18.9 L) pail of BilgeRemed effectively treats 500 gallons (1892 L) of bilge water on ships and larger boats. No waste for disposal.
  • HydroRemed for treating free product (fuel oil) in ground water. Usually, HydroRemed is added in the ratio of 1 gallon (3.785 Liters) of HydroRemed to 10 gallons (37.85 Liters) of free product. No addition of oxygen is required however where the groundwater is anoxic or contains limited oxygen, it is recommended that HydroRemed is saturated with air before release in the ground water. Tests have shown that bacteria are able to survive in a healthy state for one week in waters of low oxygen levels when HydroRemed is saturated with air.
  • SpillRemed (Industrial) is used for industrial applications that need to remediate oily wastewater and accidental oil spills under fresh water or reduced salinity conditions. SpillRemed (Industrial) is effective in the ratio of 1 gallon (3.785 L) to 10 gallons (37.85 L) of oil and is also effective at near freezing temperatures. SpillRemed (Industrial) has been used for an open water spill in an enclosed berm in a mine in Canada where the water temperatures were near freezing. It has also been used for remediation of  oily waste water in containment ponds at metal recycling facilities, auto recycling facilities, at a port maintenance facility and at air port maintenance hanger in NJ and many other similar industrial oily waste water situations.

    Reports and case studies

    • Remediation at a port waste water management facility.
    • Florida DEP acceptance letter for use of SpillRemed (Industrial) for ground water and soil
    • Fuel oil spill in a berm at Kemess Mines, Canada
    • Maintenance at air port hanger and for oil separator at Ronson Aviation, NJ
  • SpillRemed (Marine)® is included in the National Contingency Product list of the U.S. EPA as a bioremediation agent for in situ treatment of open water oil spills and for shoreline cleanup and is effective on weathered oil in addition to diesel, gasoline and crude oil. SpillRemed (Marine) can therefore be introduced at any time in the life cycle of an oil spill and is effective on small spills as well as larger spills. It can be used as a do-it-yourself solution by small boat and marina operators as well as for large scale cleanup operations in open water marine spills. SpillRemed (Marine)® is non-toxic and is not harmful to marine life, and it has been found to be an excellent pre-treatment agent for oiled birds. A license has been issued by the California State Fish and Wildlife Agency for use of SpillRemed (Marine) for open water oil spills. * Disclaimer: SpillRemed is on the US EPA's NCP Product Schedule. This listing does not mean that EPA approves, recommends, licenses, certifies or authorises the use of SpillRemed (Marine) on an oil discharge. This listing means only that data have been submitted to the US EPA as required by subpart J of the National Contingency Plan 40 CFR Section 300.915
  • SpillRemed Marine 5G (18.9L)

    4,695.30 excl. VAT
    SpillRemed (Marine)® is included in the National Contingency Product list of the U.S. EPA as a bioremediation agent for in situ treatment of open water oil spills and for shoreline cleanup and is effective on weathered oil. This product can be introduced at any time in the life cycle of an oil spill and is effective on small spills as well as larger spills and, thus, can be used as a do-it-yourself solution by small boat and marina operators as well as for large scale cleanup operations in open water marine spills. SpillRemed (Marine)® is non-toxic and is not harmful to marine life, and it has been found to be an excellent pre-treatment agent for oiled birds. A license has been issued by the California State Fish and Wildlife Agency for use of SpillRemed (Marine) for open water oil spills. * Disclaimer: SpillRemed is on the US EPA's NCP Product Schedule. This listing does not mean that EPA approves, recommends, licenses, certifies or authorises the use of SpillRemed (Marine) on an oil discharge. This listing means only that data have been submitted to the US EPA as required by subpart J of the National Contingency Plan 40 CFR Section 300.915
  • SpillRemed (Marine) is included in the NCP List of the US EPA for treatment of 50 gallons of fuel oil spill in the open waters. It is also used for remediation of spills in marinas and other shore based facilities.
  • 1 gallon (3.785 Liters) of VaporRemed treats about 100 square feet of concrete and wooden surface. 1 gallon VaporRemed effectively treats 20 square feet on dirt. The reason for this difference is the depth that oil and our products travel with the oil. Note for international users : 3.785 liter can treat about about 10 sq.meters of concrete and wooden surface and about 2 sq.meters on dirt/soil.
  • VaporRemed is also available in a 5 gallon (18.9 Liter) pack for larger area or for multiple application for eliminating fuel oil fumes almost instantly. Fuel oil fumes gone in minutes. Effective on concrete, wood and metals in the ratio of 1 gallon to 100 square feet or 3.785 liters for about 10 square meters. In soil 5 gallons would treat surface contamination in 100 square feet or 10 square meters of moist dirt.
  • Available in single 8 oz trigger spray bottle for spills in less than 20 square feet area and for routine maintenance schedule for application after a job. It is also used for spray on shoes after stepping into fuel oil during servicing.
    • Effective on concrete, wood, carpet and metal
    • Removes fuel oil odor from clothes and shoes
    • Removes fuel oil odor from interior of cars, SUV, trucks and boats